Planar C3013T Bedienungsanleitung PDF herunterladen (Seite 40)

Restore Condition

This option determines under what conditions the System BIOS will restore CMOS RAM from

FBD main block #1 when booting. The restore conditions are: Always; Never; and Bad CMOS.

The default is Never. After replacing the CMOS battery you can replace the lost information by

setting this parameter to Always or Bad CMOS and then exiting and rebooting. The CMOS will

be updated during the reboot. You can then reset this parameter to Never.

Clear Over Temperature Error

Selecting this clears the system Over Temperature Error once <enter> is pressed. An Over

Temperature Error is created when the internal temperature exceeds 50˚C, preventing damage to

the flat panel display. Should this condition persist, see the Problems and Suggestions section in

Appendix C.

Chapter Five: BIOS Setup 29

CS Manual LAYOUT#1787 3/9/98 5:33 PM Page 29

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Keine Kommentare

Planar C3013T Bedienungsanleitung Seite 40