Planar C3013T Bedienungsanleitung PDF herunterladen (Seite 34)

Integrated Peripherals Sub-Menu

The options in this sub-menu configure the onboard serial and parallel ports and disk controllers.

Figure 20 — Integrated Peripherals sub-menu.

COM A

This option configures the serial port labeled on the front panel as COM A. The choices for I/O

base addresses and IRQs are: Disabled; 3F8H, IRQ4; 2F8H, IRQ3; 3E8H, IRQ4; 2E8H,

IRQ3; and Auto. Auto causes the System BIOS to choose a base address and IRQ setting that

avoids conflicting with the other ports. The default I/O base and IRQ for this COM port is

3F8H, IRQ4.

COM B

This option configures the serial port labeled on the front panel as COM B. The choices for I/O

base addresses and IRQs are: Disabled; 3F8H, IRQ4; 2F8H, IRQ3; 3E8H, IRQ4; 2E8H,

IRQ3; and Auto. Auto causes the System BIOS to choose a base address and IRQ setting that

avoids conflicting with the other ports. The default I/O base and IRQ for this COM port is

2F8H, IRQ3.

LPT Port

This option configures the parallel port labeled on the front panel as LPT. The choices for I/O

base addresses and IRQs are: Disabled; 378H, IRQ7; 278H, IRQ5; and Auto. Auto causes the

System BIOS to choose a base address and IRQ setting that avoids conflicting with the other

ports. The default I/O base and IRQ for this LPT port is 378H, IRQ7.

LPT Mode

This option sets the mode under which the LPT port operates. The selections are: Output only;

Bi-directional; and ECP. ECP is the default.

Diskette Controller

This option enables or disables the onboard floppy disk controller. The default is Enabled.

Chapter Five: BIOS Setup 23

CS Manual LAYOUT#1787 3/9/98 5:33 PM Page 23

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Keine Kommentare

Planar C3013T Bedienungsanleitung Seite 34