Planar PL2011MW Bedienungsanleitung Seite 1

9 FULL Selects wide format for display. Expansion Mode ASPECT Selects 4:3 format for display. Auto Adjustment Auto adjusts the H/V Position, Pha

10 Information Shows the resolution, H/V frequency and input port of current input timing. Icon Function Description 9300 CIE coordinated Color

11Repeat this step to unlock.

12Technical Information Specifications LCD Panel Size 20W" Display Type Active matrix color TFT LCD Resolution 1680 x 1050 Display Dot 1

13Power Management Mode Power Consumption* AC Input LED Color DPM On 48 W maximum 240 VAC Green DPM Off 2 W maximum 240 VAC Orange DC swi

14Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. SYNC WI

15 SYNC WIDTH FRONT PORCH BACK PORCH TIMING NAME FH (KHz) FV (Hz) SYNC POLARITY TOTAL/ ACTIVE (DOT / LINE) (DOT / LINE) PIXEL FOREQ.(MHz) 1024x768 6

16the display and cannot be expanded to full screen.

17Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA card

18Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits

1Contents Preface ...2 Installation ...

2Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked f

3Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD

4Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean

5 Connecting the LCD Monitor and Base When you open the box, place the monitor and put on the desk first. (See fig. 1-1) nConnect the LCD monitor an

6 Interface for Arm Applications The rear of this LCD display has four integrated 4 mm, 0.7 pitch threaded nuts, as well as four 5 mm access holes

7Display Controls User Controls A brief description and the location of all LCD Monitor functions controls and indicators: Figure 2-1 1 Power LE

8Adjusting the Monitor's Display Main OSD Main Menu iconSub Menu item Sub Menu item Description STANDARD Default Setting. Reflects native